Fermenting in jars

deluxestogie

Administrator
Staff member
Joined
May 25, 2011
Messages
26,467
Points
113
Location
near Blacksburg, VA
After fully color-curing, all tobacco can be kilned (fermented) effectively with 6 to 8 weeks at temps between 123°F and 128°F in high humidity. Above 122°F, mold cannot grow. Below that, mold, which is ubiquitous, may ruin your tobacco.

Bob
 

JBitz

New Member
Joined
Sep 4, 2026
Messages
3
Points
3
Location
Alberta
After fully color-curing, all tobacco can be kilned (fermented) effectively with 6 to 8 weeks at temps between 123°F and 128°F in high humidity. Above 122°F, mold cannot grow. Below that, mold, which is ubiquitous, may ruin your tobacco.

Bob
Does the thickness of the leaf change the temperature? I have read samsun canik is thin compared to Swedish Ahus and L'Assumption. I assume the humidity becomes less of a factor the higher the tempature is?

Joe
 

The Haroo ln

Haroon
Joined
Mar 11, 2025
Messages
352
Points
93
Location
United kingdom
Thicker leaves may increase the humidity in the 1st week or so when sweating/fermenting. The amount will obviously vary depending on the amount of leaves you kiln at one time
 

deluxestogie

Administrator
Staff member
Joined
May 25, 2011
Messages
26,467
Points
113
Location
near Blacksburg, VA
Does the thickness of the leaf change the temperature? I have read samsun canik is thin compared to Swedish Ahus and L'Assumption. I assume the humidity becomes less of a factor the higher the tempature is?
During the span of 17 growing seasons, I have managed to grow over 100 different, named varieties of tobacco. All of those varieties, regardless of their priming level (how high up the stalk they grew), and regardless of the thickness of the leaves, can be successfully kilned in:
6 to 8 weeks at temps between 123°F and 128°F in high humidity.
The relative humidity needs to be above about 60% at operating temperature. [I last grew L'Assomption 201 a couple of years ago. A lovely cigar variety.]

Bob
 
Top