Wombat's 2026 Grow Log

Wombat_smokes

Well-Known Member
Joined
Jul 7, 2025
Messages
208
Points
93
Location
Utah
A brief case study of seedlings and nutrition:

This picture is of my 8 week old Trabzon (front) and Little Dutch (back) fall crop experiment. This is also 1 hour after watering a VERY thirsty tray of seedlings with their 1st dose of fertilizer: 1 teaspoon of 18-18-21 all purpose fertilizer in 1/2 gallon of water. The sister trays of Bitlis, Anatolian, Malatya, Shargo, Small Stalk Black Mammoth, and Åhus are equally anemic.
1567.jpg
No leaf clipping, no fertilizers (until today). Some plants have decently green new growth while others are variegated (light green to mottled yellow). All plants have lower leaves that have yellowed or bleached out (chlorosis).

It is normal for older, lower leaves to die back as they become unnecessary for the plant's growth; however, this is not what is happening. These leaves are being "cannibalized" - nutrients taken from lower leaves to feed new growth in the absence of good nutrition.

I avoided fertilizers to prevent "explosive" growth prior to hardening them for transplant. I was also curious about the impact of leaf clipping. While my Åhus and this tray present modest root growth into the 1020 tray, it's nowhere near as prolific as my 1st crops that received occasional fertilizers and leaf clipping.

Conclusions:

While fertilizers with a good N-P-K rating are essential to healthy, robust plant growth; timing is equally important. Timing is not only what you feed and how often, but includes when you administer (esp. with respect to growth stage). My case study demonstrates a moderately extreme case of withholding nutrients to promote a rapid growth phase at time of outdoor acclimation and transplant.

I'm certain they will do well as they harden & transplant, but applying fertilizers closer to 4 weeks would provide stronger plants. The leaves would be vibrant green, plentiful & large enough to clip; and while an equally robust root system would develop. The more biomass above & below the soil at time of transplant guarantees the best survival and recovery rates from transplanting.
 

Wombat_smokes

Well-Known Member
Joined
Jul 7, 2025
Messages
208
Points
93
Location
Utah
Bitlis harvested
1572.jpg

Northwoods Seeds describes "low, compact" growth. I was not expecting these to grow like cabbages.
1568.jpg
While it's most likely a combination of heat and soil nutrients, I kinda like it. If my 2nd crop grows the same way, I'd advocate for this as a dual purpose variety - somkable and ornamental (try saying "ornamental oriental" 5 times fast).
 

Wombat_smokes

Well-Known Member
Joined
Jul 7, 2025
Messages
208
Points
93
Location
Utah
A majority of my Shargo is harvested. Left a few small stalks to stalk harvest and tips in the field.
1573.jpg
1574.jpg
My first 8 stringers of leaf have 7-10 each. Now I'm out of T-post fence holders. I wanted to stalk cure all of the Shargo, but I decided I don't have enough space nor do I have enough poles to hold the weight. I had to prop up my sun curing pole to handle the weight of my Trabzon #2.

Until the Frog Eye Orinoco and Åhus are fished curing/drying, I'm out of space, unless I find another spot to cure. Keeping things in my shed makes inspection easy. We'll see what happens.

Something I noticed with my Shargo bed leaves, as they color cure, they become extremely sticky and act like duct tape when it gets stuck to itself - nearly impossible to separate. Is this common for Burley or unique to Shargo? When people talk about "sticky" leaves, I interpret "tacky" - moderately sticky like masking tape or strong velcro, not ultra sticky like fly paper/glue traps.
 

Wombat_smokes

Well-Known Member
Joined
Jul 7, 2025
Messages
208
Points
93
Location
Utah
The battle against mold is NEVER over.

I started taking my Åhus off of their stringers. I lost 3 small leaves to the same mold/mildew I discovered while they were bag curing. 3 more leaves our of so many isn't too bad, but it does reinforce the need for vigilance.

While turning and hanging more of my Shargo, I encountered a new form of rot. A gray/green powder. Definitely fungal. This fungus is mostly at the base of the midrib where the leaf joins the stalk. I removed 3-4 inches of stem & lamina to preserve the 4 leaves I discovered with this new enemy. I made 5 new stringers that I will test sun curing with. There are about 15 leaves remaining in the color curing pile.
 

Wombat_smokes

Well-Known Member
Joined
Jul 7, 2025
Messages
208
Points
93
Location
Utah
Another day; another harvest. Anatolian is now hanging for sun curing. The leaves are extremely green and extremely rugged. Some lower leaves are yellowing on the alligator bumps. My indoor extras refused to yellow until the flowers were spent. This is a variety where you decide when they are mature enough to harvest.

Frog Eye Orinoco is primed to the 6th or 7th leaf position. I missed a lot of suckers and these are the BIG ones - some of the sucker leaves are almost the size of the main leaves.

I also primed half of my Yellow Pryor to the 4th leaf position.

I feel like I took on too many varieties and plants. My curing space is running low and I still have Semois, Little Dutch, One Sucker, Small Stalk Black Mammoth, and Düzce left to harvest. However, I have NO REGRETS! Growing for pipe blending requires diversity and I'm looking forward to the rest of the journey as I process and age my leaf.
 

Wombat_smokes

Well-Known Member
Joined
Jul 7, 2025
Messages
208
Points
93
Location
Utah
I also found Yellow sac spiders, a nocturnal hunting spider.

I've been seeing round hole with clean edges (esp. on the Shargo) that might be hornworm damage, but I haven't seen any worms as I harvest. I wonder if my wasp, praying mantis and spider population are big enough to control them.

Frog Eye orinoco pile
1577.jpg

Yellow Pryor
1578.jpg

Åhus has also been prone to mold. The leaves I brought into case had several I threw out and some I sprayed with 2:1 peroxide mixture. Plenty of fizzy spots, but I'm thinking of just putting these leaves in the bin for safety. I'm concerned I'll loose a fair bit of Åhus to mold & mildew.
 
Top